1/5 EX 200A ESC

1/5 EX 200A ESC

Model:    SK-300047

  This New Toro Beast 200A Brushless ESC is an upgrade of TORO EX200A for 1/5 scale car. It is usable with 4S to 8S LiPo packs and comes with a 6 /7.4V@15A BEC system and can be widely programmed by Program box or SKYLINK USB interface .  
  This upgrade Toro Beast 200A has more advantages, one of main features is it is a BEC ESC,and the BEC is adjustable with 6V15A or 7.4V/15A. It also has new high performance heat dissipation power boards ,bearings and lowest resistance . It easily runs up to 10 horse power range applications with these advanced features.  
 
     
  Built-in high power BEC. The Output voltage of built-in BEC is selectable between 6.0V and 7.4V and with  
    15A Maximum output current .
  Support LiPo batteries up to 8S.
  Data Logging: The controller can measure and record parameters such as your battery volts,amp draw,  
    motor rpm, and controller temperature.
  Red copper connector is used internally of the ESC. It can decrease the internal resistance at high  
  current situation.
  Heat transfer: The internal resistance can be reduced by laminated copper stack control technology so  
    that the dynamic thermal equilibrium can be got.
     
 
 
 
 
 
  The users could preset and store 10 sets of profiles in the ESC. These data could be called out for application at any time without any special program setting. The user could also reset the profile according to his request.  
 
   
  Low voltage protection
  Motor and ESC overheat protection
  Signal lost protection
 
  The firmware can be updated by connecting the ESC with PC or smart phone.  
 
 
  The ESC can be programmed by program box, PC (connected with SKYLINK) or smart phone via Wi-Fi module.  
  1. PC via SKYLINK (optional part SK-600013)  
 
 
     
 
  2. Program Box (optional part SK-300046)  
 
 
 
 

  Dimensions  
  Weight   359g (without wire)
  Constant/Burst Current   200A/800A
  Motor Compatible   Brushless Sensorless ESC
  Car Compatible   1/5 Off Road, On Road
  Motor Limits   KV≤1100, 4 Poles
  Resistance   0.0002ohm
  Battery Cell Count   4-8S LiPo
  BEC Output   6.0V/7.4V @ 15A
 
       
Revised  2016-03-09