NC2500 Charger

    Model:    SK-100059-01


      SkyRC NC2500 AA/AAA Battery Charger & Analyzer is more than just a battery charger which can perform a number of different functions. If you are interested in getting optimum power, turbo fast charging (up to 2500mA Charge Current) and the most battery life possible, this is an excellent choice for you.  
    The charger has four compartments for AA batteries and four compartments for AAA batteries and it is able to charge both AA and AAA batteries simultaneously. Due to the different capacity, you could set the charge rate accordingly or set all at once. With charging,discharging, refresh & analyze, break-in and cycle functions as well as individual LCD displays for charging status; this charging unit is reliable, user-friendly and ideal for use in the home, office or on a trip.
     
     
     
         
      Fit both AA and AAA NiMH/NiCd batteries. Batteries can be inserted or taken out easily.  
     
     
      Larger LCD display with backlit for easy reading. Digitally display various modes during operation. Also the charging current (in mA), accumulated charging capacity (in mAh), the voltage (in Volt) and time elapsed (in hh:mm)  
     
     
      Seven buttons for easy programming and operation. Four Slot Number Buttons (SNB) to display individual
    slot operation data during the various operation modes, and other three buttons for programming and operation.
     
     
     
         
      It supports the charger stand at different tilt angles and enables the users get best operational experience.  
     
         
      Depending on different battery condition, there are five modes of operation  
         
      Charge the battery at the selected rate. Suitable for batteries used frequently.  
     
      Discharges the batteries at the selected rate.  
     
      Suitable for batteries stored for more than two weeks but less than 3 months or the batteries showing poor performance. This mode can also determine the battery capacity for battery matching.  
     

    Battery forming is a charge-discharge-charge cycle which forces a full charge into the new batteries and those stored for more than 3 months at a very low rate to activate the batteries.

         
    Performs charge-discharge cycle for up to 12 times. Cycle mode an remove memory effect of rechargeable batteries.
         
      Damaged battery detection: To ensure safety, the charger performs an "impedance check" at the beginning of the program. If the battery fails this test, "FAIL" would be displayed and program will be terminated.Built-In PTC thermistor to avoid over heat and independent negative delta V eliminates over and undercharging.  
     
         
      Finally, your charger gets its own APP. You could control this smart charger by your smart phone via Bluetooth. More touch, easy control. Operating this charger on your smart phone with your fingers, you will have best using experience and inter-activity. What's more, you could get more functions (optional Delta Peak Value and Discharger Termination Voltage) and information (battery temp, internal resistance and voltage graphic) in Smart Phone Control Mode.  
     
     
     

     

          Standard Alone Mode   Smart Phone Control Mode
      Charging Current   0.2-2.5A   0.2-2.5A
      Delta Peak   5mV   3-15mV
      Discharging Current   0.1-1.0A   0.1-1.0A
      Discharging Termination Voltage   0.9V   0.5-1.0V
      Battery Capacity Range   500mAh-3500mAh   500mAh-3500mAh
      No. of Cycle   1-12   1-12
      Top off Charging Current   100mA   100mA
      Maintenance Charging Current(Trickle)   30mA   30mA
      Temperature Portection   55℃   55-70℃
      Input Power   12V/2.5A
      USB Power   5V/1A
      Weight   370g
      Dimensions(L*W*H)   154*104*50mm
           

     

    Revised  2016-10-28