SKYRC Super mini BEC 10A 6S

    Model:    SK-600055

     
      The BEC is a voltage regulator that supplies a constant voltage to the receiver and servo. For ESC with a built-in Linear BEC, it will likely have only a limited ability to supply power to your receiver and servos without overheating protection functions. If you are using a 4 cells LiPo battery or more than a 12 cells NiCd/NiMH battery, you should consider using SkyRC 6S 10A Super Mini S-BEC. This S-BEC is small and light with wide input voltage from 6-25.2V. It is a waterproof BEC with over-current and over-heat protection functions. What's more, it is common for a switching BEC to attain 90% or higher efficiency.  
     
         
      Compact size(23x23x15mm) and light weight(30g)
      Wide input voltage from 6-25.2V (2-6 cells LiPo battery or 5-18 cells NiCd/NiMH battery)  
      Over-current and over-heat protection functions  
      Fully-enclosed design for waterproof(IP54)  
      90% or higher efficiency  
      Less electromagnetic interference  
     
     
      ESC with built-in BEC
    You must disable the built-in BEC functions of the ESC first. Follow the diagram below to disconnect the red wire from the ESC
     
     
     
      ESC without built-in BEC
    You can leave the red wire intact when using and ESC without BEC
     
     
     
     

      Dimersions  
      Weight   30g
      Input Voltage   6-25.2V DC
      Input Leakage Current   ≤50ua
      Input Idle Current   ≤20ua
      Output Current   10A
      Output Voltage   6V +/- 0.1V
      Working Temp   -20-65℃
      Storage Temp   -10-70℃
      Protection   IP54



     
    Over Heat Protection

    Revised  2016-11-07