SKYRC B6 Ultimate 200W X2

    Model:    SK-100038

    Special features

     

    Optimized operating software
    Ultimate 200W×2 features the so-called AUTO function that set the feeding current during
    the process of charging or discharging. Especially for Lithium batteries, it can prevent the
    overcharging which may lead to an explosion due to the user's fault. It can disconnect the
    circuit automatically and alarm once detecting any malfunction. All the programs of this
    product were controlled through two way linkage and communication, to achieve the
    maximum safety and minimize the trouble. All the settings can be configured by users!


    Internal independent lithium battery balancer
    Ultimate 200W×2 employs an individual-cell-voltage balancer. It isn’t necessary to
    connect an external balancer for balance charging.


    Balancing individual cells battery discharging
    During the process of discharging, Ultimate 200W×2 can monitor and balance each cell
    of the battery individually. Error message will be indicated and the process will be ended
    automatically if the voltage of any single one cell is abnormal.

     

    Adaptable to various type of lithium battery
    Ultimate 200W×2 is adaptable to various types of lithium batteries, such as Li-Ion, LiPo
    and the new LiFe series of batteries.


    Fast and storage mode of lithium battery
    Purposes to charge Lithium battery varies, fast charge reduce the duration of charging,
    whereas store state can control the final voltage of your battery, so as to store for a long
    time and protect useful time of the battery.


    Maximum safety
    Delta-peak sensitivity: The automatic charge termination program based on the principle
    of the Delta-peak voltage detection. When the battery's voltage exceeds the threshold,
    the process will be terminated automatically.


    Automatic charging current limit
    You can set up the upper limit of the charging current when charging your NiCd or NiMH
    battery; it is useful for the NiMH battery of low impedance and capacity in the 'AUTO'
    charging mode.


    Capacity limit
    The charging capacity is always calculated as the charging current multiplied by time. If
    the charging capacity exceeds the limit, the process will be terminated automatically
    when you set the maximum value.


    Temperature threshold

    The batteries internal chemical reaction will cause the temperature of the battery to rise.
    If the temperature limit is reached, the process will be terminated. This function is
    available by connecting temperature probe, which is included in the package.


    Processing time limit:
    You can also limit the maximum process time to avoid any possible defect.


    Data store/load
    For user’s convenience, it can store maximum 10 data of different batteries. You can
    establish the data contains program setting of the battery to charge or discharge. These
    data can be called back at any time you need and the process can be executed without
    program setting.


    Cyclic charging/discharging
    1 to 5 cyclic and continuous process of charge>discharge or discharge>charge is
    operable for battery refreshing and balancing to stimulate the batteries activity.


    PC based analysis using USB Communication (For output 1 only.)

    The Ultimate 200W×2 is fitted with a mini USB port on the front side of the case; a USB
    cable(not included) can be connected to this socket in order to link the charger to a PC.
    “Charger Monitor” program enable you to view graphs of charge and discharge curves,
    with a capacity, voltage, temperature and ampere display, and individual curves can be
    individually suppressed or superimposed to allow a visual comparison of the data.
    “Charger Monitor” software can be downloaded from our website.

     

    USB Power Supply
    The USB power supply can provide 5V, 1A continue current. You can power your mobile
    phone, digital camera or even iPod via the USB power supply.

    Operating voltage range:DC 12.0~18.0 Volt

    Circuit power:Max. Charge power 2x200Watts
                             Max. Discharge power 2x25Watts

    Charge current range:0.1~10.0A

    Discharge current range:0.1~5.0A

    Current drain for balancing Li-Po/Ion/Fe:200mA/cell

    Li-ion/Fe/Polymer cell count:1~6cells

    NiCd/NiMH battery cell count:1~15cells

    Pb battery voltage:2V~20V

    Net weight:740g

    Dimension:200x135x57mm