SKYRC Digital Pitch Gauge

    Model:    SK-500009-01

     
      The digital pitch gauge is designed for application in model helicopters and serves to measure the rotor blade pitch value.The built in digital gyroscopic sensor is capable of detecting pitch angle, with result displayed through LCD screen, providing a simple and precise way of measuring pitch angle.  
     
      Large LCD for easy reading  
      Up to 700 mm blades (Suitable for 250 to 700 size helicopters)  
      Fast and accurate measurement  
      Zero function  
      Auto rotating display  
      Auto power-off (Power shuts down after 20 minutes without any movement)  
     
     
      Press "POWER" button for about two seconds to turn on the power. For correct pitch measurements,DPG-010 digital pitch gauge must be zeroed before being used. Press "ZERO" button once to zero the gauge.Please refer to the below instruction to understand how to use DPG-010. After using, Press "POWER" button for about two seconds to turn off.  
     
     
    Place the DPG-010 horizontally leveled with top of helicopter frames.
    Press〝ZERO〞to zero the gauge.
     
     
     
     
    Mount the DPG-010 on main blade to measure the pitch.
     
     
     
     

      Body Dimension   113x56x14mm
      Suitable blade width   20mm~75mm
      Detectable pitch range   ±90°
      Temperature   0~40°C
      Resolution   0.1°
      Current consumption   2.8mA
      Battery   CR2032 Lithium X2
      Weight (including battery)   40g 
      Aluminium blade clamp


     

    Revised  2017-02-22