SKYRC1000W Charger

    Model:    SK-100069


      SKYRC Ultimate 1000W features with high efficiency with synchronous rectification technology, it is accurate and stable and also has some new features and functions. Users could set the terminal voltage by themselves and connect it to PC for PC control and firmware upgrade. What's more, users could also use it as Lithium Battery Meter and Lithium Battery Internal Resistance Meter. There are Automatic Charging Current Limit, Capacity Limit, Temperature Threshold and Processing Time Limit which makes the charger safe to use.  
     
     
             
          For some small batteries without main connector, you could use the battery socket to charge and discharge the battery to storage status.  
             
      The additional LiHV mode is able to charge the new generation of LiPo batteries with an end of charge voltage of 4.35 V.      
             
     
         
      Ultimate 1000W employs the circuit that features output power of 1000 watts. It can charge or discharge up 20 cells of NiCd/NiMH or 8 series of Lithium batteries with maximum current of 40A.  
         
      SKYRC Ultimate 1000W employs an individual-cell-voltage balancer. It isn't necessary to connect an external balancer for balance charging.  
         
      The charger can store up to 10 different charge/discharge profiles for your convenience. Users can call out these data at any time without any special program setting.  
         
      The user can check battery's total voltage, the highest voltage, the lowest voltage and each cell's voltage by this charger.  
         
      The user can check battery's total internal resistance and each cell's internal resistance.  
         
      Automatic Charging Current Limit
    Capacity Limit
    Temperature Threshold
    Processing Time Limit
     
         
      The charger allows user to set the charge/ discharge end voltage.  
         
      The user can monitor pack voltage, cell voltage and other data during the charging, view charge date in realtime graphs, and can also control charging and update firmware from "Charge Master".  
         
     
      The user can monitor pack voltage, cell voltage and other data during the charging, view charge data in realtime graphs, and can also control charging and update firmware from "Charge Master".  
     
     
     
      Smart Phone Control via Wi-Fi Module (both iOS and Android)This charger can be controlled and operated by smart phones via Wi-Fi module(optional part SK-600075).  
     
     

      Dimersions  
      Weight   1240g
      LiPo/LiFe/Lilon/LiHV Battery Cell Count   1-8S
      DC Input Voltage   11-30V
      Charge Circuit Power   1000W
      Charge Current   Max. 40.0A
      Balance Port Charge Current   10-500mA
      Discharge Circuit Power   80W
      Discharge Current   0.1-8.0A
      Regenerative Discharge Current   0.1-40.0A
      Current Drain for Balancing   Max. 800mA
      NiMH/NiCd Battery Cell Count   1-20S
      Trickle Charging Current   50mA-300mA & OFF
      Pb Battery   2-24V



     
    Revised  2016-10-28