D100 Charger

    Model:    SK-100089


     
      SKYRC D100 is a twin-channel charger with two independent circuits which can charge two different kinds of batteries simultaneously. It also supports power distribution in AC mode to get max charging power to shorten charging time. What's more, users could set the terminal voltage by themselves and connect it to PC for PC control and firmware upgrade. Besides that, users could also use it as Lithium Battery Meter and Battery Internal Resistance Meter. There are Automatic Charging Current Limit, Capacity Limit, Temperature Threshold and Processing Time Limit which makes the charger safe to use.  
     
         
      The tilt stand can support the chargers at different tilt angles so that the users can get best operational experience.  
         
         
      SKYRC D100 allows you to plug 2 batteries into one charger simultaneously, and it will intelligently and automatically charge 2 batteries at once.  
         
         
      In AC mode, it supports power distribution, for example, Channel A-70W, then Channel B-30W, the total power is 100W.  
         
         
      The additional LiHV mode is able to charge the new generation of LiPo batteries with an end of charge voltage of 4.35 V.  
         
         
      SKYRC D100 employs an individual-cell-voltage balancer. It isn't necessary to connect an external balancer for balance charging.  
         
      Automatic Charging Current Limit
    Capacity Limit
    Temperature Threshold
    Processing Time Limit
     
         
      The charger can store up to 10 different charge /discharge profiles for each channel. You can keep the data pertaining to program setting of the battery of continuous charging or discharging. Users can call out these data at any time without any special program setting.  
         
      The user can check battery's total voltage, the highest voltage, the lowest voltage and each cell's voltage by this charger.  
         
      The user can check battery's total internal resistance and each cell's internal resistance.  
         
      The user can monitor pack voltage, cell voltage and other data during the charging, view charge date in realtime graphs, and can also control charging and update firmware from "Charge Master".  
         
      The charger allows user to change the end voltage. (for expert user only)  
     
      The user can monitor pack voltage, cell voltage and other data during the charging, view charge data in realtime graphs, and can also control charging and update firmware from "Charge Master".  
     
     
     
     

    Smart Phone Control via Wi-Fi Module (both iOS and Android) This charger can be controlled and operated by smart phones via Wi-Fi module (optional part SK-600075).

     
     
     
     

      Dimension  
      Net Weight   975g
      Input Voltage   AC100-240V / DC 11-18V
      Charge Circuit Power   DC Input 2 x 100W
      AC Input 100W (Support Power Distribution)
      Discharge Circuit Power   2 x 10W
      Charger Current Range   0.1-10A
      Discharge Current Range   0.1-5A
      Current Drian for Balancing Port   Max 200mA/cell
      Trickle Charging Current   30mA-300mA & OFF
      LiPo/LiFe/Lilon/LiHV Battery Cell Count   1-6S
      NiMH/NiCd Battery Cell Count   1-15S
      Pb Battery Voltage   2-20V