IMAX B6 Ultimate

    Model:    SK-100004


     

    IMAX ultimate employs the circuit that features output power of 200 watts. It can charge or discharge up 18 cells of NiCd/NiMH or 6 series of Lithium batteries with maximum current of 10A.B6 ultimate has an individual cell voltage balancer, so it does not required any balancer separately when charging Lithium batteries (LiPo/LiIon/LiFe) for voltage balancing.

     

    Opetimized operating software
    iMAX B6 ultimate features the so-called AUTO function that set the feeding current during the process of charging or discharging. Especially for Lithium batteries, it can prevent the overcharging which may lead to an explosion due to the user's fault. It can disconnect the circuit automatically and alarm once detecting any malfunction. All the programs of this product were controlled through two way linkage and communication, to achieve the maximum safety and minimize the trouble. All the settings can be configured by users!


    Internal independent lithium battery balancer
    iMAXB6 ultimate employs an individual-cell-voltage balancer. It isn’t necessary to connect an external balancer for balance charging.

     

    Balancing individual cells battery discharging
    During the process of discharging, iMAX B6 ultimate can monitor and balance each cell of the battery individually. Error message will be indicated and the process will be ended automatically if the voltage of any single one cell is abnormal.

     

    Adaptable to various type of lithium battery
    iMAXB6 ultimate is adaptable to various types of lithium batteries, such as Li-ion, LiPo and the new LiFe series of batteries.


    Fast and storage mode of lithium battery


    Purposes to charge Lithium battery varies, ‘fast’ charge reduce the duration of charging, whereas ‘store’ state can control the final voltage of your battery, so as to store for a long time and protect useful time of the battery.


    Maximum safety
    Delta-peak sensitivity: The automatic charge termination program based on the principle of the Delta-peak voltage detection. When the battery's voltage exceeds the threshold, the process will be terminated automatically.


    Automatic charging current limit

    You can set up the upper limit of the charging current when charging your NiCd or NiMH battery; it is useful for the NiMH battery of low impedance and capacity in the 'AUTO' charging mode.


    Capacity limit
    The charging capacity is always calculated as the charging current multiplied by time. If the charging capacity exceeds the limit, the process will be terminated automatically when you set the maximum value.


    Temperature threshold
    The battery’s internal chemical reaction will cause the temperature of the battery to rise. If the temperature limit is reached, the process will be terminated. This function is available by connecting temperature probe, which is included in the package.


    Processing time limit:
    You can also limit the maximum process time to avoid any possible defect


    Data store/load
    For users convenience, it can store maximum 10 data of different batteries. You can establish the data contains program setting of the battery to charge or discharge. These data can be called back at any time you need and the process can be executed without program setting.


    Cyclic charging/discharging
    1 to 5 cyclic and continuous process of charge>discharge or discharge>charge is operable for battery refreshing and balancing to stimulate the battery's activity.


    PC based analysis using USB Communication


    The B6 Ultimate is fitted with a mini USB port on the right-hand side of the case; a USB wire can be connected to this socket in order to link the charger to a PC."charger monitor" Program enable you to view graphs of charge and discharge curves, with a capacity, voltage, temperature and ampere display,and individual curves can be individually suppressed or superimposed to allow a visual comparison of the data.

    USB Power Supply
    The USB power supply can provide 5V, 1A continue current. You can power your mobile phone, digital
    camera or even your IPod via the USB power supply.


     

    Operating voltage range: DC 11. 0-18.0 Volt
    Circuit power: Max. Charge power 200Watts
    Max. Discharge power 25Watts
    Charge current range: 0.1-10.0A
    Discharge current range: 0.1-5.0A
    Current drain for balancing Li-Po/Ion/Fe: 300mA/cell
    Li-ion/Fe/Polymer cell count: 1-6cells
    NiCd/NiMH battery cell count: 1-18cells
    Pb battery voltage: 2-20V
    Net weight: 607g
    Dimension: 150x116.3x53mm


    Revised  2016-10-28