IMAX Quattro B6

    Model:    SK-100012

        Tired of charging one battery at a time? Try iMAX Quattro B6! At last, a charger where you can charge 4 Battery packs at the same time no matter what battery type you may have.


       iMAX Quattro B6 allows you to plug 4 batteries into one charger simultaneously, and it will intelligently and automatically charge all 4 of them at once to their maximum capacity. To top of it, the batteries being charged do not even need to have the same configuration. You can connect different chemistry Ni-MH/Ni-CD/LiPo/LiFe batteries into any of the charging ports. No more staying up late for charging batteries.

       Quattro B6 charger offers a complete charging solution for novice and expert RC enthusiasts alike. The multi-tasking versatility of this new charger makes it a perfect fit for nitro and electric modelers, regardless of what you drive, hover, float or fly.

    Optimized operating software

    iMAX Quattro B6 features the so-called AUTO function that set the feeding current during the process of charging or discharging. Especially for Lithium batteries, it can prevent the overcharging which may lead to an explosion due to the user's fault. It can disconnect the circuit automatically and alarm once detecting any malfunction. All the programs of this product were controlled through two way linkage and communication, to achieve the maximum safety and minimize the trouble. All the settings can be configured by users!

    Internal independent lithium battery balancer

    iMAX Quattro B6 employs an individual-cell-voltage balancer. It isn't necessary to connect an external balancer for balance charging.

    Balancing individual cells battery discharging

    During the process of discharging, iMAX Quattro B6 can monitor and balance each cell of the battery individually. Error message will be indicated and the process will be ended automatically if the voltage of any single one cell is abnormal.

    Adaptable to various type of lithium battery

    IMAX Quattro B6 is adaptable to various types of Lithium batteries, such as Li-ion, LiPo

    and the new LiFe series of batteries.

    Processing time limit:

    You can also limit the maximum process time to avoid any possible defect.

    Data store/load

    The maximum five batteries' data can be stored for users' convenience. You can keep the data pertaining to program setting of the battery of continuous charging or discharging. Users can call out these data at any time without any special program setting.

    Cyclic charging/discharging

    1 to 5 cyclic and continuous process of charge>discharge or discharge>charge is operable for battery refreshing and balancing to stimulate the battery's activity.

    Fast and storage mode of lithium battery

    Purposes to charge Lithium battery varies, 'fast' charge reduce the duration of charging, whereas 'store' state can control the final voltage of your battery, so as to store for a long

    time and protect useful time of the battery.

    Maximum safety

    Delta-peak sensitivity: The automatic charge termination program based on the principle of the Delta-peak voltage detection. When the battery's voltage exceeds the threshold, the process will be terminated automatically.

    Automatic charging current limit

    You can set up the upper limit of the charging current when charging your NiCd or NiMH battery; it is useful for the NiMH battery of low impedance and capacity in the 'AUTO' charging mode.

    Capacity limit

    The charging capacity is always calculated as the charging current multiplied by time. If the charging capacity exceeds the limit, the process will be terminated automatically when you set the maximum value.

    Temperature threshold*

    The battery's internal chemical reaction will cause the temperature of the battery to rise.

    If the temperature limit is reached, the process will be terminated. * This function is available by connecting optional temperature probe, which is not included in the package.

    PC based analysis uing USB Communication

    iMAX Quttro B6 offer PC based program can analysis the characteristic of the battery via USB port. It shows a graph of voltage, current, capacity curves. It also shows the individual voltage of each cell in the Lithium battery pack. PC-LINK USB adaptor can be purchased separately


    Charging Specifications:

    Battery Type

    Voltage Level

    Max Charge Voltage

    Max Fast Charge Rate

    Min. Discharge Cutoff Level


    1.2V /Cell


    1 - 2C*

    0.85V / Cell


    1.2V /Cell


    1 - 2C*

    1.0V / Cell


    3.6V / Cell

    4.1V / Cell


    2.5V / Cell


    3.7V / Cell

    4.2V / Cell


    3.0V / Cell


    3.3V / Cell

    3.6V / Cell


    2.0V / Cell

    Pb (Lead Acid)

    2.0V / Cell

    2.46V / Cell


    1.75V / Cell


    Input voltage: 11-18V DC
    Four Output
    Total circuit power: 200Watts(4x50W)
    Charging current: 0.1-5A
    Dimension: 225.4x158.6x62.4mm
    Net weight: 1.09kg

    Revised  2016-10-28