UPGRADE YOUR BROWSER

You are running an older browser. Please upgrade your browser for better experience.

S65 Charger

SK-100152
S65 AC Balance
Charger / Discharger
Max Power
65W
Charge Current
6.0A
SkyRC S65 is an AC input high-performance micro processor control charge/discharge station with battery management suitable for use with all current battery types, LiPo, Lilon, LiFe, NiCd, NiMH, PB and also new generation LiHV with end voltage 4.35V. It is an AC input charger/discharger with compact size. The maximum charging power of S65 is 65W with maximum charging current 6A and discharging current 2A.
LiPo
LiFe
2-4S
Lilon
LiHV
NiMH
NiCd
6-8S
PB AGM
6V(3P)-
12V(6P)
6A
MAX
CHARGER
2A
MAX
DICHARGER
PB AGM & Cold Charge
XT60 Battery Connector
Bigger Cooling
Fan
Lithium Battery Balancer
Program Data Store / Load
Battery Resistance
Meter
Battery Voltage
Meter
Maximum Safety
Terminal Voltage Control
Capable of operating on 100 - 240 volts AC household current.
Embedded XT60 Battery Connector
By embedding the XT60 battery connector in the charger, it gets more convenient & safe for charging the most popular battery with XT60 connector and avoid the possibilities of reverse polarity for it.
AGM & Cold Charge Modes for PB Battery
SkyRC S65 can charge AGM battery and also can be used for charging PB battery at very low temperatures.
Smart & Efficient Cooling System
Temperature controlled 7000rpm high speed sleeve bearing cooling fan effectively blows the air through the extruded aluminum heat sink, effectively cooling the device.
Higher Accuracy with Three Decimals for Battery Voltage
The charger firmware is highly optimized by displaying the battery voltage with three decimals during the process of charging & battery voltage measuring.
3.752 V   3.752 V
3.792 V   3.742 V
Temperature Threshold
If the temperature limit is reached, the process will be terminated.
Ext.Temp
27℃
Int.Temp
34℃
We are Certified, We are Qualified!
Our products comply with the laws and regulations into each country we ship. Our products are designed, tested and approved to meet worldwide standards for Product Safety, Electromagnetic Compatibility and other regulatory compulsory requirements, when used for their intended purpose.
Specifications
S65 Charger
This product is suitable for charging and discharging LiFe/ Lilon/ LiPo/ LiHV/ NiMH/ NiCd/ PB batteries. For Pb battery, AGM Charge and Cold Charge mode are available.
Size and Weight
Case Material: Plastic
Case Size: 118*115*45mm
Weight: 315g
Buttons And Port
Power
Input Voltage: AC 100-240V
Charge Wattage: 65W
Discharge Wattage: 10W
Battery
Battery Types/Cells:
LiPo/LiFe/LiIon/LiHV: 2-4 cells
NiMH/NiCd: 6-8 cells
Pb: 3-6 cells

Battery Capacity Range:
NiMH/NiCd:100-50000mAh
LiPo/LiIon/LiFe/LiHV:100-50000mAh
Pb: 100-50000mAh
Charge and Discharge
Charge Voltage
NiMH/NiCd: Delta peak detection
LiPo: 4.18-4.25V/cell
LiFe: 3.58-3.7V/cell
LiIon: 4.08-4.2V/cell
LiHV: 4.25-4.35V/cell

Discharge Cut-off Voltage
NiMH/NiCd:0.1-1.1V/cell
LiPo:3.0-3.3V/cell
LiFe:2.6-2.9V/cell
LiIon: 2.9-3.2V/cell
LiHV: 3.1-3.4V/cell


Charge Current: 0.1A-6.0A
Discharge Current: 0.1A-2.0A
Balance Cells: 2-4 cells
Balance Current: 300mA/cell Max
Safety Timer: 1-720minutes off
Charge Method:
CC/CV for lithium types and lead(Pb) batteries Delta-peak Sensitivity for NiMH/NiCd.
Manuals
S65 Instruction Manual V2.10 (EN) pdf
2022-10-19
The website uses cookies
At SkyRC, we value your privacy and aim to provide the best browsing experience. Cookies help us understand how you use our site, enhance functionality, and tailor content specifically for you.
Become a Dealer?📃