UPGRADE YOUR BROWSER

You are running an older browser. Please upgrade your browser for better experience.
4-8S NiMH Battery

AC Peak Charger
SkyRC eN18 NiMH Peak Charger
Compact but Versatile
Want to get the most out of your batteries? You really need to make sure you can deliver a full charge to your batteries with a SkyRC eN18 Peak Charger.
SkyRC eN18 is more than just a peak charger - it's a versatile peak charger capable of charging both electric car battery packs and nitro car receiver packs. This is possible because the SkyRC eN18 offers voltage ranging from 4.8 to 14.4V at 1.2 amp. You can charge 6-8 cell NiMH battery packs as found in most electric cars, trucks, and buggies. With the 1.2 amp charge rate, you can safely fast charge any 4-5 cell nitro car NiMH receiver's pack.
Delta-V Peak detection
With the Delta Peak detection circuitry, the SkyRC eN18 allows your batteries to reach their full capacity when charging, so you can get the most power and run time from your batteries. It achieves this by using peak detection circuitry that monitors the voltage of the battery pack while it's being charged and automatically shuts the charger off when the packs' voltage peaks and then starts to drop. This is in contrast to a timed charger, where you often end up with a battery pack that's not fully charged.
Delta Peak
detection circuitry
Compact and
lightweight
NiMH compatible
Maximum output
1.2A
Short-Circuit
Protection
Reverse Connection Protection
Universal-Voltage Input
Accurate voltage
High Reliability
Lower Operating
Temperature
High-efficiency
and Energy-saving
Plug and Charge
eN18 will start charging on the fly once the correct battery is plugged.
Stabilized Output for
Maximum Safety
With the stable pulse charge, eN18 pumps a fixed 1.2A current to charge your battery reliably. All the chargers have passed the rigorous burn-in process to ensure they are durable enough to withstand use cycles and other operating conditions.
Stabilized Output for
Maximum Safety
With the stable pulse charge, eN18 pumps a fixed 1.2A current to charge your battery reliably. All the chargers have passed the rigorous burn-in process to ensure they are durable enough to withstand use cycles and other operating conditions.
Trickle Charge:
optimize the battery
Like all batteries to self-discharge, NiMH batteries even have a relatively high self-discharge rate of about 1% per day. Trickle charging can keep NiMH batteries in optimal condition to replenish the charge that is continually draining off.
Good insulation performance, high dielectric strength.
With the high-temperature resistance and flame retardant casing material, the charger is safe and reliable to use.
100% environmentally friendly materials, no toxic substances.
Bi-Color LED:
Easy Status at a Glance
Steady RED
Standby
Flashing GREEN
Charging
Steady GREEN
Fully Charged
Flashing RED
ERROR
Detachable International
Compatibility Converter*
Universal-Voltage Input
With the worldwide input voltage of 100-240V AC and detachable plug*, RC hobbyists can enjoy racing and flying wherever they are.
*Contact the local dealer for more information.
Output Connector*
Tamiya Male or Deans Male
*For The specific connector, please refer to the actual SKU description.
Optional Parts
The charging cables is not included in the package. You need to purchase them separately.
Deans Female to Tamiya Male
SK-600023-17
Tamiya Female to Mini Tamiya Male
SK-600023-18
Specifications
Size and Weight

Dimension: 85mm×50mm×54mm
Weight: 120g
Other Parameters
Input: AC100V-240V 50/60Hz
Battery Type: NiMH
Output Voltage: 4.8V-14.4V
Output Curent: 1.2A
Output Power: 18W Max.
Battery Cell: 4-8S
Output Cable Length: 70cm
Operating Temperature: 0℃-40℃
Relative Humidity: 5%-75%
Storage Temperature: -10℃ - 70℃
Storage Humidity: 5%-75%

Manuals
eN18 Instruction Manual V1.0 pdf
2021-09-16